Start with your site, vehicle and destination. Then compare complete chargers, storage, software and components by the specifications that matter to your project.
These two products solve different mobile-energy jobs. V2L supplies compatible AC loads from a supported EV; V2V transfers DC energy between a compatible donor EV and receiving EV.
Use a compatible EV as a temporary AC power source. This active V2L adapter and discharger converts high-voltage DC for the selected regional outlet configuration.
Use mobile vehicle-to-vehicle charging to transfer DC energy from a compatible donor EV to a receiving EV through a matched two-cable configuration.
Choose complete equipment or components, then narrow by product group, power, interface and application. Open any product to review the key selection points.
Use this wall-mounted charger when a site needs a 20 or 30 kW DC output from a 380 VAC supply and a 200–750 VDC battery window.
Use this configuration when a single-connector DC charger is required in the 40–60 kW range with a 200–750 VDC output.
Use this configuration when a single- or dual-connector charger must span 40–240 kW and a 200–1000 VDC output window.
Use this configuration when a movable 40 kW DC charger must accept a 400 or 480 VAC supply and cover a 200–1000 VDC output window.
Use this configuration when a wall-mounted DC charger must deliver 40 kW per port from a 400 or 480 VAC supply.
Use this configuration when a 60–80 kW DC charger must cover a 200–1000 VDC output and offer air- or liquid-cooled connector routes.
Use this configuration when a standalone charger must cover a configurable 60–240 kW range with a 200–1000 VDC output.
Use this configuration when a 60–240 kW DC charger must support a 200–1000 VDC output and either air- or liquid-cooled connector routes.
Use this configuration when a site needs a 60–240 kW DC charger with three or four charging connectors and a 200–1000 VDC output.
Use this advertising-screen charger family when a site needs a 22-inch display with a 60, 80 or 120 kW CCS2 charging configuration.
Use this configuration when a high-power standalone charger is required in the 240–400 kW range with a 200–1000 VDC output.
Evaluate this 480kW advertising-screen DC fast charging station for high-throughput sites that need dual charging outputs and a large integrated display.
Choose a product to compare specifications or add it to your project. We match the connector, labeling and accessories to the destination and quantity you submit.
Try a different model, power term or product group.
Every page starts with the parking pattern or operating problem the product family is meant to address.
Hardware, site-power control, software and installation are shown as one working stack rather than isolated catalogue items.
Bring the selected power, connectors, quantity, destination documents and project services into one purchasing path.
Select the site type, spaces, destination market and vehicle connectors. The configurator will assemble the matching hardware, power-control, software and installation scope.
Your site choices and product interests are attached to the project brief automatically.